|
Technical Data Sheet |
 | PRODUCT NAMEUltra High Build 1K Chassis PrimerISSUE DATE1/4/2011PART NUMBEREM319 |
 | PRODUCT DESCRIPTIONA 1K Alkyd based High Build coating offering 'Superior Build & Levelling' properties combined with excellent corrosion protection due to the incorporation of modified Zinc Phosphate.
|
 | MAXIMUM VOC CONTENT
REGULATIONS / COMPLIANCE
|
 | COLOUR RANGEAvailable in Buff colour |
 | TECHNICAL INFORMATION | |
| FLASHPOINT | 25°C | |
| STORAGE | 12 months in original sealed containers | |
 | CLEANINGEnsure surfaces to be coated are dry and must be cleaned using the appropriate product to remove all traces of contaminants. |
 | SUGGESTED PRIMER / FILLER / SEALER SYSTEMS
|
 | HEALTH AND SAFETY
|
APPLICATION METHODS |
| COMPLIANT SPRAY GUN | PRESSURE POT | AIRLESS/AIR-ASSISTED |
| MIXING RATIO | |||||||
Base | 4 | Base | 4 | Base | 1 | |||
| THINNER OPTIONS | |||||||
EM601 | EM601 | EM601 | | |||||
| VISCOSITY | |||||||
30-35 seconds DIN4 | 30-35 seconds DIN4 |
|
| |||||
| SPRAY GUN SETUP | |||||||
1.8-2.0 | 1.2-1.4 | 11-15 thou / 40° |
| |||||
| NUMBER OF COATS | |||||||
2 full | 2 full | 1 full |
| |||||
| FLASH OFF | |||||||
10-15 mins between coats | 10-15 mins between coats |
|
| |||||
| DRYING TIME | |||||||
Touch dry | 30mins @20°C | Touch dry | 30mins @20°C | Touch dry | 30mins @20°C | |||
| RECOATABILITY / OVERCOATING | |||||||
Minimum: 1 hr @ 20° to 3/4 weeks without flatting, dependant on where vehicle has been stored. After which, cleaning & flatting is required before topcoating. | ||||||||
| WET FILM THICKNESS | |||||||
100 microns | 100 microns | 100 microns |
| |||||
| DRY FILM THICKNESS | |||||||
60-70 microns | 60-70 microns | 60-70 microns |
| |||||
