|
Technical Data Sheet |
 | PRODUCT NAMEIndustrial Cellulose TopcoatISSUE DATE28/1/2010PART NUMBEREM507 |
 | PRODUCT DESCRIPTIONEM507 Industrial Cellulose Topcoat is a fully comprehensive range of clear and pigmented lacquer finishes for high quality industrial finishing of all types, particularly over both hard and softwood substrates.
|
 | MAXIMUM VOC CONTENT
REGULATIONS / COMPLIANCE
|
 | TECHNICAL INFORMATION | |
| COVERAGE | 10 square metres per litre (Theoretical) | |
| FLASHPOINT | 4°C | |
| TEMP RESISTANCE | 70°C | |
| STORAGE | 12 months in original sealed containers | |
 | CLEANINGEnsure surfaces to be coated are dry and free from all traces of contaminants. |
 | HEALTH AND SAFETY
|
APPLICATION METHODS |
| AEROSOL | COMPLIANT SPRAY GUN | PRESSURE POT |
| MIXING RATIO | |||||||
RFU | Base | 1 | Base | 1 | ||||
| THINNER OPTIONS | |||||||
| EM607 | EM607 | | |||||
| VISCOSITY | |||||||
RFU | 25 seconds B4 cup | 25 seconds B4 cup |
| |||||
| SPRAY GUN SETUP | |||||||
N/A | 1.4 - 1.8 | 1.2 - 1.4 |
| |||||
| NUMBER OF COATS | |||||||
2 full coats | 2 full coats | 2 full coats |
| |||||
| FLASH OFF | |||||||
10 mins | 10 mins | 10 mins |
| |||||
| DRYING TIME | |||||||
Touch dry | 10 mins @ 20°C | Touch dry | 10 mins @ 20°C | Touch dry | 10 mins @ 20°C | |||
| RECOATABILITY / OVERCOATING | |||||||
At any stage after flash-off | At any stage after flash-off | At any stage after flash-off |
| |||||
| POT LIFE | |||||||
N/A | N/A | N/A |
| |||||
| WET FILM THICKNESS | |||||||
50 microns | 50 microns | 50 microns |
| |||||
| DRY FILM THICKNESS | |||||||
15 microns | 15 microns | 15 microns |
| |||||
