PRODUCT NAME

Hammer Finish Colours

ISSUE DATE

1/12/2010

PART NUMBER

EM528-EM535

PRODUCT DESCRIPTION

Hammer finishes are used to produce an attractive and durable special effect finish, which will hide imperfections on marked, pitted, or uneven surfaces of all types.

Non-Cell (Air dry acrylic) are the most popular general purpose Hammer finish for application on a wide variety of substrates, offering excellent drying gloss, adhesion and weathering properties.

MAXIMUM VOC CONTENT

• 0.54kgs/ltr

REGULATIONS / COMPLIANCE

• Not Applicable

COLOUR RANGE

EM528 - Kingfisher Blue, EM529 Standard Green, EM530 Black, EM531 Silver, EM534 Cast, EM535 Copper

TECHNICAL INFORMATION

0.96

20 square metres per litre (Theoretical)

25°C

80°C

12 months in original sealed containers

CLEANING

Surfaces should be thoroughly clean, dry, free of all contamination & degreased.
Etch Primers should be used over aluminium and alloys. For best results on steelwork use T-EuroMix HBZP primer or Speedbuild primer prior to applying the Hammer finish.

HEALTH AND SAFETY

• Refer to MSDS and tin label prior to use.
• Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.