|
Technical Data Sheet |
 | PRODUCT NAME2K Wash Etch PrimerISSUE DATE15/12/2009PART NUMBEREM304 |
 | PRODUCT DESCRIPTIONA Zinc Chromate transluscent 2K Etch Primer offering outstanding adhesion and corrosion resistance when applied to metals, especially aluminium and alloys. |
 | MAXIMUM VOC CONTENT
REGULATIONS / COMPLIANCE
|
 | COLOUR RANGEAvailable in Transluscent Yellow. |
 | TECHNICAL INFORMATION | |
| COVERAGE | 20 square metres per litre (Theoretical) | |
| FLASHPOINT | -4°C | |
| TEMP RESISTANCE | 200°C | |
| STORAGE | 12 months in original sealed containers | |
 | CLEANINGEnsure surfaces to be coated are dry and free from all traces of contaminants. |
 | HEALTH AND SAFETY
|
APPLICATION METHODS |
| COMPLIANT SPRAY GUN | PRESSURE POT |
| MIXING RATIO | |||||||
Base | 1 | Base | 1 | |||||
| ACTIVATOR OPTIONS | |||||||
EM402 | EM402 | |||||||
| VISCOSITY | |||||||
15 seconds B4 cup | 15 seconds B4 cup |
|
| |||||
| SPRAY GUN SETUP | |||||||
1.6-1.8 | 1.0-1.1 |
|
| |||||
| NUMBER OF COATS | |||||||
1 even coat | 1 even coat |
|
| |||||
| FLASH OFF | |||||||
10-15 mins between coats | 10-15 mins between coats |
|
| |||||
| DRYING TIME | |||||||
Touch dry | 30mins @20°C | Touch dry | 30mins @20°C | |||||
| RECOATABILITY / OVERCOATING | |||||||
Can be overcoated after 30 mins without sanding with either T-EuroMix 1K or 2K Primers or T-EuroMix 1K or 2K Topcoat systems. Epoxy Primers / Topcoats are not recommended. Denibbing or flatting prior to topcoating is recommended. | ||||||||
| POT LIFE | |||||||
8 hrs @ 20°c | 8 hrs @ 20°c |
|
| |||||
| WET FILM THICKNESS | |||||||
25 microns | 25 microns |
|
| |||||
| DRY FILM THICKNESS | |||||||
5 microns | 5 microns |
|
| |||||
| * | This product is supplied as ready for use when activated with Wash Etch Activator EM402, however Epoxy Thinner EM609 can be used for thinning if required and equipment cleaning. Please note the addition of EM609 Thinner will affect VOC levels. | |||||||
